There are three places that wiring harnesses hook up to. I would start by checking for codes. One of these adjustments has been the distance that we travel to visit family. This small belt causes all sorts of problems. I highly recommend using replacement radios. Don't know how long it will last though. You have to give us more detail information so we can help you out.
However, I think I will just install the new one without connecting any of the integrated wires. At my dash is a square block style plug. Just a thought… Like Yes, the car does not see the new player. Kids would not accept this. I have a problem I am trying to fix.
Though my kids are gone, I like to have everything working on my vehicles. Right off the edge of the platter you should see a small clear lens. This back-torque on the shaft is just enough to make the glue give up, and now the shaft just spins inside the rubber casing. Search Our Site Using Search: Try make, model and a keyword. Also I received it in 2 days after I ordered.
Which is why I'm having such a hard time. Look for the mute button and click it. Search and searched for a descent set of schematics then I ran into your site. I am about to be hero… Step 3 — Install New Unit This part was supposed to be easy. I've found this picture which pretty much matches.
Besides, we have such a great price on these, why would you even consider buying a cheapie? Although next time it will be a piece of cake thanks to you. To go to a dealership to replace this this thing is ridiculous. This should make our upcoming 14 hour trip from New York to South Carolina less tedious! The one in question is the middle one. In 2004, Ford added wireless headphones as part of the entertainment system. Is it just like the one I have pictured in my post? Expedition: Navigator Nov 19, 2016 I had this happen in my old dodge stratus.
Push firmly in and move left to right untill it ejects,this will locate micro switch. Below you can browse the current inventory of used Ford Expedition dvd players sold by leading salvage yards across the United States. Warning - may exclude some relevant results. If the unit spins up and and then shuts down, you should check and make sure the laser pick-up assembly slider mechanism is working without any obstructions and that the small chrome rail that it slides on is slightly greased. The pinout for the 2006 Freestyle is nowhere to be found online. I then cleaned it with alcohol, put it back together and to my delight, it works. Like David, I appreciate your write up.
The rubber sleeve had broken free from the shaft, so the shaft was just spinning inside the sleeve whenever the sleeve gripped the disc. So where did that leave us? Anyhow, thanks for the work, I know it takes a lot of time to put this stuff together. Connect the following Pin 7 red to pin 5 white Pin 17 white to pin 15 green Pin 8 orange to pin 6 red Pin 18 pink to pin 16 black. And then in theory I can tap the dvd audio ones into the headphone ones and I'm golden in theory. If this doesn't work it may be broken. I just plugged it in and fired it up.
Before I fixed it, I was on the verge of crafting a hook similar to what you have found. Hopefully some of this information sparks an idea. There are some manufacturers that have had problems with the lens, depending on the age of the unit. On the rear auxiliary audio control panel located at the rear of the center console you will find the mode bottom. Fred Like I see nothing in the dvd player David, the wires are mostly blue, no markings in them either. This vehicle is being offered to.
I removed the shaft from the sleeve, roughed up the shaft with sandpaper, applied some glue, and put the sleeve back on. If you have no luck, try looking up Divx Bundle or K-Lite Codec Pack, these contain the codecs needed for the audio tracks. Then repeat using the dry end. It s a comfortable ride and then some. I tried to put a spin on the situation for the kids, but they were not impressed. My next step was to call a junkyard.
I headed out to the truck with my trusty sidekick who was only really interested in running around in the back seat. I picked up the new player after work. We'll do our best to help you find top-quality dvd players at the best prices possible. Taking it all apart to be able to expose the laser head in order to blow it and thoroughly clean it with alcohol did the trick. Step 5 — Re-wire Now that I understand which wires are where, I think that I can take the 12 wires I need, and move them all over 2 positions. Also, have you guys found a work-a-round for your wiring issues? So I purchased one from ebay.